Sony SU-WL500 Instalación página 6

Ocultar thumbs Ver también para SU-WL500:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Step 5:
Installing the TV on the
wall
WARNING
Be sure to complete the installation before
connecting the AC power cord to the wall outlet. If
you allow the AC power cord to be pinched under
or between pieces of equipment, this may result
in a short circuit or an electric shock.
Be careful not to stumble over the AC power cord
or the TV, as you may hurt yourself.
1
Connect the AC power cord and
the connecting cable(s) supplied
with the TV to the TV.
Connect the AC power cord and the connecting
cable(s) to the connectors on the rear of the TV.
For details on connecting the AC power cord
and the connecting cable(s), refer to the
instruction manual of the TV.
Notes
• You cannot connect the cables to the TV after
installing it on the Base Bracket.
• Subcontract the cable routing in the wall to a
licensed contractor.
6
(GB)
2
Install the TV onto the Base
Bracket.
 Referring to the Screw and Hook locations
diagram/table on page 9, determine the
holes of the Base Bracket for latching the
upper hooks of the Mounting Hook.
 Hold the TV securely with both hands, and
gently align it on the wall.
WARNING
• Be sure that two or more persons hold the TV when
carrying it.
• When carrying the TV, hold it in landscape
orientation, and take care not to drop it when
installing. Do not apply excessive force to the TV;
otherwise, it may be deformed.
Mounting Hook
Base Bracket

Publicidad

Tabla de contenido
loading

Tabla de contenido