Publicidad
Idiomas disponibles
Idiomas disponibles
Install the Fixture
1A
JUNCTION BOX
NEUTRAL WIRE
2
2
HOT WIRE
MAX
100
120 volt
Use
Watt
Type A19 Medium Base Lamp.
1
For 3 and 4 light fixtures: Secure the mounting plate to the wall using the anchors and anchor screws provided.
Secure the mounting plate to the junction box with two mounting plate screws.
2
3
Connect the fixture to a suitable ground in accordance to local electrical codes.
4
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
5
6
Mount the fixture base onto the mounting plate studs and secure it in place by installing the cap nuts.
7
Place the shade and spacer onto the socket and secure them in place by screwing the shade collar nut onto the
socket using the shade tool; repeat for remaining shades.
Screw the lamp(s) into the socket(s).
8
LAMP
MOUNTING
PLATE
WHITE WIRE
4
2
2
5
MOUNTING
PLATE SCREW
BLACK WIRE
MOUNTING
PLATE STUD
8
FIXTURE
BASE
7
6
CAP NUT
2
SHADE TOOL
COLLAR NUT
SPACER
SHADE
SOCKET
ANCHOR
SCREW
1
Publicidad
