Graco My Ride 65 Manual Del Usuario página 18

REAR-FACING INSTALLATION WITH
Adjust child restraint to recline position
(fig. a). Flip recline feet under child
restraint for rear facing use.
stored. (see fig. c, pg. 41)
Place rear-facing
with LATCH anchors.
(fig. b). Belt must lay flat and not be
twisted. Pull connectors to be sure they
are securely attached to the anchor points.
(fig. c).
while pulling LATCH
LATCH belt is
LATCH belt
adjustment belt. (fig. d).
(fig. e).
LATCH
and does not slip from the tightened position. If
it does not stay tight, try another seating
Vehicle must
Ball MUST be entirely in green zone (fig. f). If
necessary, place rolled towels under child
DO NOT use tether
LATCH
18
(fig. f).
rear-facing
LATCH
must be
from