Dubbing Tapes; Recording Disc-Disc Synchronized Recording - JVC PC-X290 Manual De Instrucciones

To record an AM station—Beat Cut
While recording an AM broadcast, beats may be heard
(which are never heard when listening to the broadcast
without recording it).
If this occurs, set the BEAT CUT switch on the back of the
unit to 1 or 2 to reduce the beating sound.
RELEASE
R L
ANT.
BEAT CUT
SCREW
1 2
AUX IN
SPK LABEL
(PC PLATE )
- 7 + - 8 +
- -
+ 3 + 4
+ 6 - + 5 -
- 2 + - 1 +
SUM-1 D SIZE HP2 R20
OPEN

Dubbing Tapes

1
Press TAPE.
2
Put the source cassette into the deck B, and a
recordable cassette into the deck A.
3
Press PAUSE 8, then press REC ¶ for the
deck A.
PAUSE
4
Press PLAY 3 for the deck B.
Dubbing starts.
To stop during dubbing, press STOP/EJECT 7/0 for the
deck A.
RELEASE
SPEAKER IMPEDANCE MIN 3.2
R L
RESET
SPK LABEL
(PC PLATE )
AC IN
OPEN
BEAT CUT
1 2
TAPE
REC
Recording Disc
—Disc Synchronized Recording
You can start disc play and recording at the same time.
1
Put a recordable cassette into the deck A with
the exposed part of the tape down.
• See also page 16.
2
Close the cassette holder gently.
3
Press CD/RANDOM select the CD
player as the source.
• If you want to record tracks in the desired order,
program the playing order (see page 14).
4
Press REC ¶.
The CD playback and recording start automatically.
The SYNC REC indicator appears on the display.
CD SYNC
MUTING
• When the end of the tape is reached, recording stops
and the CD playback is paused.
When CD playback ends, press STOP/EJECT 7/0 to
stop the recording.
• If you press REC ¶ while playing back the CD, the CD
player returns to the beginning of that track and the
recording starts from that track.
You cannot press REC ¶ in the following cases:
• If no cassette is inserted.
• If a protected tape is inserted.
To stop recording for a moment, press PAUSE 8.
The recording is paused, but the CD playback does
not stop.
To resume recording, press PAUSE 8 again.
To stop recording, press STOP/EJECT 7/0.
The recording stops and the CD playback is
paused.
To remove the cassette, press STOP/EJECT 7/0
while recording is stopped.
– 18 –
REC
REC
PAUSE
STOP/EJECT
STOP/EJECT