Lagos Paint TROTTER REFINISH Manual De Montaje Y Utilización página 20

EN
Filters must be replaced when the red alarm
of the control panel switches on
Left LED of the control panel indicates the status of the intake
plenum filter. Right LED indicates the status of the extraction
filter
Intake filter Extraction filter
alert alert
To change the filters correctly, please read carefully the fo-
llowing instructions:
Switch off the machine and remove the
plug from the power socket
FILTERS REPLACEMENT
1. Remove the 4 plastic hooks that support the cardboard fra-
me
2. Remove the 3 metal covers: Unlock the hooks and remove
the lower screws with a 10mm wrench.
3. Once you removed all the metal protections, you can have
acces to 3 types of filters: from left to right are: synthetic
filter, activated carbon filter and paint-stop filter.
4. Slide out the filters you want to replace
5. After replacing the filters, put back the metal protection, fas-
ten the plastic hooks and screw again the lower screws with
a 10mm wrench
6. Put in place the carboard filter frame and fasten the lateral
hooks
7. Plug back the paintTROTTER to the power socket and it is
ready to work again.
PLEASE NOTE: Filters must be replaced in series of 3 (3
synthetic filters, 3 activated carbon filters or 3 paint-stop
filters)
20