Publicidad
Idiomas disponibles
Idiomas disponibles
Technical data
A - recommended working pressure; bar [psi]
B - inflation range; bar [psi]
C - length of hose; mm [inches]
D - thread of air connector
E - weight; kg [lb]
General safety warnings
When working strictly observe the
general safety recommendations
for air tools and for compressors.
See ISO 11148-10.
Safety warnings
•
The compressed air may project small solid ob-
jects with the air stream at great speed, which may
injure the operator or other persons. Use personal
protective equipment - special clothing, glasses,
gloves, and closed shoes.
•
While working, do not direct the flow of com-
pressed air onto yourself, other persons, or ani-
mals.
•
Do not exceed required working pressure.
•
Dust, appearing in the process of work, may be
injurious to health, highly inflammable or explosi-
ble. Do not use the air tool near objects emitting
heat or open fire. The use of air tool near such
objects may result in a fire hazard.
Intended use
This air tool is designed for tires inflation. It
equipped with a manometer (allows to monitor
tire pressure while pumping) and flexible hose
(allows you to work in narrow and hard to reach
places).
The manufacturer reserves the possibility to introduce changes.
1 Flexible hose
2 Fixing lever
3 Tip
4 Manometer
5 On / off switch
6 Discharge pressure button
7 Body
8 Air connector
Check before each using of the tightness of all
threaded connections, as well as the tightness of
connections and hoses.
Air tool should be pre-connected to the com-
pressor.
Switching on:
Press and hold the on / off switch 5.
Switching off:
Release the on / off switch 5.
•
Connect the air tool to the compressor, using
a special air hose.
•
Press lever 2 and connect tip 3 to the nipple of
tire, after that release lever 2.
•
Inflate the tire by pressing on the on / off
switch 5 and watching the manometer 4. Release
the on / off switch 5 when the desired pressure
is reached. If the tire pressure is higher than the
recommended value, press and hold the 6 button
to relieve pressure.
Press lever 2 and disconnect tip 3 from the
•
nipple of tire, after that release lever 2.
•
After using, disconnect the air tool from the
compressor.
English
3
Components
Initial operation
Switching on / off
Working advice
Publicidad
