Channel Menu Screen (Fig.3); Bluetooth ® Menu Screen (Fig.4) - AEB ANT B-TWIG 8 MOBILE Manual De Uso

5.2 | CHANNEL MENU SCREEN (Fig.3)

Press the desired channel button to enter this menu. Once entered, it is possible to view and
adjust the parameters of CH1-CH2-CH3, in detail:
- 3-band equalizer, HIGH/MID/LOW, operating from -12 dB to +12 dB
- HPF filter, frequency from 20 Hz to 400 Hz (only for CH1 and CH2 )
Once the adjustments have been made, you can return to the main menu by pressing the
green arrow.
APP
LINE
- 12dB
HIGH
CH1
0dB
MID
0dB
LOW
210Hz
HPF
Fig.3
5.3 | BLUETOOTH MENU SCREEN (Fig.4)
®
The B-TWIG 8 MOBILE system is equipped with a Bluetooth
allows you to make a data connection with the APP and simultaneously stream audio from
your mobile device.
Press the button to access this menu. Once entered, it is possible to enable or disable
the APP CONNECT and AUDIO STREAMING functions, in detail:
APP CONNECT ON: if activated, allows data synchronization with the "ANT SPEAKER
CONTROLLER" app, available for Apple iPhone only. This function is already active in factory
setting. Anyway, be sure to activate this function before opening the APP from your phone.
APP CONNECT SLAVE: if activated (Fig.4A), it configures the unit as an additional secondary
system (Slave) perfectly controllable via APP. In this way it is possible to choose between
Mono (Fig.4B) or Stereo (Fig.4C) listening. Make sure that the APP CONNECT control is set
to ON in the main system (Master)
AUDIO STREAMING ON: if activated, allows audio streaming from your mobile device. This
function is already active in factory setting. Be sure to enable this function before pairing
your device via the Bluetooth connection
®
PAIR: if pressed, activates synchronization via Bluetooth
secondary (Slave) systems The PAIR button is generically designed for those who do not
B-TWIG 8 MOBILE
16 User manual |
5.0 stereo receiver, which
®
between the main (Master) and
®
desire controlling the system with the dedicated APP. It is possible to interrupt
the synchronization to the secondary system by pressing ABORT (Fig.4D) or
permanently disconnect it at the end of your session by pressing UNPAIR (Fig.4E)
Note: For iPhone users it is not necessary to press this button as the
synchronization between two systems, carefully configured, takes place
automatically after 10 seconds after APP launch.
It is always possible to return to the main menu by pressing the green arrow
APP
APP
APP CONNECT ON APP CONNECT
AUDIO AUDIO
ON
STREAMING STREAMING
PAIR
Fig.4 Fig.4A
APP APP
APP CONNECT APP CONNECT
ON
AUDIO AUDIO
ON
STREAMING STREAMING
MONO STEREO UNPAIR MONO STEREO
Fig.4B Fig.4C
APP APP
APP CONNECT ON APP CONNECT
AUDIO AUDIO
ON
STREAMING STREAMING
ABORT MONO STEREO
Fig.4D Fig.4E
SLAVE
ON
PAIR
ON
ON
L R
UNPAIR
ON
ON
UNPAIR
B-TWIG 8 MOBILE
| User manual
17 17