Desoutter DWT 30-10 Instrucciones De Utilizacion página 3

6159938830
USER INSTRUCTIONS
Digital Wrench Transducer DWT
1 – SUMMARY
The DWT family consists in wrenches from 30 to 1000 Nm.
They are all light and ergonomic designed.
Due to the technology of the transducer, it may be used with SIGMA2001, SIGMA2D, DELTA4000,
DELTA4D, DELTA5000 or DELTA5D readouts. These models are not sensitive to the cable length
between the transducer and readout because the "torque" or "torque and angle" signals are converted
to a numerical value in the transducer. The exclusively numerical link between the units provides
reliability for the measurement and immunity from any external interference. No settings are
necessary and therefore no risk of error is possible when connecting one of these transducers – they
are automatically recognised due to an internal memory which stores the identity, characteristics and
maintenance data.
2 – OPERATION
Select a suitable size of wrench appropriate to the maximum torque rating of the joint. Connect to the
readout, select an appropriate operating mode and then operate the tool in the normal way.
3 (68) 01/2010