DeWalt MOBILELOCK DS600 Guia De Inicio Rapido página 4

GPS Tracking Features
Simple Locates: Users can click "Locate" from the Account
Summary page or the Configure Units page and in about 30
seconds receive back a link in the Event History which, when
clicked, displays a birds eye view on a map with the approximate
location of your device.
Location View: Users can also do locates from the Location
View page or view prior locates done from other pages. Here
they can see the estimated range of accuracy of the locate
(+/- feet) along with a represented circle around the dot on the
map as well as the approximate street address of the location.
Tracking Sessions: Users can set up automatic tracking sessions
which enable the device to locate at a set interval down to every 10
seconds (depending on the service plan subscribed to). For a list
of service plans please go to www.dewaltmobilelock.com.
Virtual Fence: Users can set up a virtual area online in their
account and be alerted if their device travels into or out of that area.
NOTE: To improve location accuracy, follow these recommendations:
• Best locations are outdoors with line of sight to the sky.
• Keep away from underground locations.
• Avoid structures with metal or concrete roofs, tall buildings or
dense foliage.
• Windows with sun shielding films can block satellite signals.
• Military airbases and government buildings may block satellite
signals
Initial Set Up
Mobilelock™ is a self-install portable alarm system and GPS
locator. It is easy to set up and operate. There are "?" icons
throughout the online Mobilelock™ account with more information
as well as several video tutorials under the Help tab. Follow the
steps in the Quick Start Guide in the beginning of this manual.
Activation
IMPORTANT: The alarm is non-functional until the service is
activated. To activate, the device must be connected to power
through its wall charger and must be in Verizon cell coverage.
A pattern of depressing and releasing the tamper button is also
necessary to initiate the process. Be sure the following necessary
information is available at the time of activation:
1. MEID number on the back of the device under the bar code.
2. Credit card information.
3. Account and notification details
Walk Test
After activating your device log into your new account. First send
a Status Request to the device from the Configure Units Page to
confirm the device is communicating properly and has sufficient
battery charge and is in an area with sufficient cellular signal.
Next select the sensors, speaker and battery settings desired
and set up the contacts for notification on the Alarm Contacts
Page. Then Arm the DS600 from the Configure Units Page and
trip each of the sensors. Check to see that the respective alarm
was received in the Event History and that notification of the
alarm was received per the settings on the Alarm Contacts page.
Mounting
• The DS600 has two mounting holes for easy installation.
Use two #8 screws (not provided)
• Use the magnets on the back for easy attachment to ferrous metal.
Use a zip tie through the mounting holes in addition to the
magnets if there is a risk that the device could fall off what it is
mounted to.
• Be sure that the device is secure so it will not be bumped or
otherwise moved.
Specifications
Power adapter 120 V AC input, 4.65 VDC output
Battery capacity
Operating temperature
Full One Year Warranty
The D WALT Mobilelock™ Portable Alarm System is warranted
e
for one year from date of purchase. We will repair, without charge,
any defects due to faulty materials or workmanship. For warranty
repair information, visit www.dewaltmobilelock.com or email us
at info@dewaltmobilelock.com. This warranty does not apply to
accessories or damage caused where repairs have been made
or attempted by others. This warranty gives you specific legal
rights and you may have other rights which vary in certain states
or provinces.
D WALT, GUARANTEED TOUGH, and the yellow and black
e
color scheme are trademarks of the D
used under license. Mobilelock™ is a trademark of Mobilelock
LLC. Manufactured by Mobilelock LLC: 550M Ritchie Hwy #279,
Severna Park, MD 21146.
Protected by the following patents:
US D581,303S
US 7,961,088 B2
5200 mAH typical
-4˚ to 122˚F (-20˚ to 50˚C)
WALT Industrial Tool Co.
e