Troubleshooting - Klarstein BELLEVIN 62 Manual De Instrucciones

EN
26
Shutdown in absentia
• Turn off the unit first. Then disconnect the power plug.
• Remove the entire contents.
• Clean the unit.
• Keep the lid open slightly to prevent condensation, mould or odours.
Installation at another Location
• Turn off the unit first. Disconnect the power plug.
• Remove the entire contents.
• Secure all loose objects with adhesive tape.
• Tape the doors shut.
Energy Saving Tips
The wine refrigerator should be placed in the coolest place in the room, away from
appliances that emit heat. heating pipes and direct sunlight. Make sure the door is
properly closed when the wine refrigerator is on.

TROUBLESHOOTING

Problem Possible Cause and Suggested Solution
Wine cellar Not plugged in.
does not
The appliance is turned off.
operate.
The circuit breaker tripped or the fuse is broken.
Wine cellar Check the temperature control setting.
is not cold
External environment may require a higher setting.
enough.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The light does Not plugged in.
not work.
The circuit breaker tripped or a blown fuse.
The bulb is out of order.
The light button is "OFF".