Computer Connection; Usb Connection - Oki C710n Guia De Instalacion

Insert Power Cable
Insert the power cable (a) and turn the
printer ON (b).
b
O I
WARNING!
Be sure to use the 15A AC power cord
supplied with the printer. Use of a power
cord NOT supplied with this printer, or an
extension cord, may result in overheating,
and could be a safety hazard.
CAUTION!
To prevent fire or shock hazards, connect
the power plug only to a properly rated
power outlet.
CAUTION!
Do not connect this product to an
uninterruptible power supply (UPS). For
further information please contact Oki Data
at 1-800-OKIDATA or www.okidata.com.
Print a Demo Page
1 Press Menu on the control panel.
2 Press the down arrow to select Print
Information.
3 Press Enter.
4 Press the down arrow to select Demo
Page.
5 Press Enter.
6 Demo1 appears. Press Enter.
7 Execute appears. Press Enter.

Computer Connection

Install Network Cable
Connect the network cable between the
printer network port (a) and the Ethernet
hub or router.
a
a
Install Parallel Cable
Connect the IEEE 1284 parallel cable
between the printer parallel port (a) and
the host computer.
a

USB Connection

Note: Install the printer software BEFORE
installing the USB cable. See
"Windows - USB Setup" on page 7.
C710 Setup Guide
5
a