Adding a Gate Extension
STEP 1
Replacement Parts
A
Hardware Kit #14055 Includes:
Threaded Spindle Rods w/ Adjustment
Wheel (4), Spring Loaded Upper Door
Mounting Pin (1), 1" Wall Mount
Screws (4), Frame Assembly Screw (2),
Wall Cups (4), Hex Key (1)
Remove the top and bottom threaded spindle rods.
Assemble the gate and extension as illustrated. Reposition the gate and fit
in accordance with the gate fitting.
NOTE:
It is preferable to install any extensions on the hinge side of the gate.
Need more width? Additional extensions sold separately
Hardware Kit
www.regalo-baby.com
90 DAYS LIMITED WARRANTY
If, during the first 90 days after consumer
purchase of the item, under reasonable and
non-commercial use and conditions of
maintenance, it fails while owned by the original
purchaser because of the quality of materials or
workmanship of finish and assembly, Regalo
International, LLC, will replace or repair it at
Regalo's option. PROOF OF PURCHASE
REQUIRED.