ION Acadia Guia Del Usuario página 3

Features
Top Panel
Power Button: Press and hold to turn Acadia
Note: Acadia
Bluetooth
Double-press to enter Multi-Sync
See Bluetooth Connecting with Acadia
sync multiple Multi-Sync
BASS Bass Boost Button: Press this button to enhance the overall bass frequency response.
Radio Button: Press this button enter FM radio mode.
– / + Volume Buttons: Press these buttons to decrease or increase the speaker volume.
< / > Tune/Track Buttons: Press these buttons to tune in a radio station or go to the
previous/next track on a Bluetooth connected device. The voice prompts will indicate
the current frequency.
To "seek" (jump to the next available radio station) in radio mode, hold either button
down for a few seconds.
Play/Pause Button: Press this button to play or pause on a connected Bluetooth
device.
When Bluetooth connected, press and release this button to answer a phone call.
To reject an incoming call, press and hold this button. To end the call, press this
button again.
Rear Panel
A. Aux In: This stereo 1/8" (3.5 mm) input can be
used to connect a CD player, MP3 player, or
other audio source.
B. USB Device Charging Port (5V, 1A): Connect
your device's charge cable here to charge it.
USB charging only functions when the unit's
power is turned on.
Note: You may experience some noise when charging certain devices while also using
the aux input.
C. Lights Button: Press this button to cycle between light modes.
D. Micro-USB Speaker Charging Port: For fastest charging, power off Acadia
the included micro-USB cable to connect the speaker to (A) a USB power adapter (DC
5V, not included) connected to a power outlet, or (B) your computer (powered on).
A solid red LED will appear next to the power button to indicate that the speaker is
charging. When charging is complete, the red LED will turn off.
TM
will automatically power off after 15 minutes if no audio is playing.
®
Button: Press and hold to disconnect a Bluetooth device.
TM
compatible speakers.
TM
on and off.
TM
mode.
TM
to learn how to connect via Bluetooth and
TM
and use
3