Descargar Imprimir esta página
Delta MicroTech 9000 PureTouch AquaSuite 77100 Serie Manual De Instrucciones
Delta MicroTech 9000 PureTouch AquaSuite 77100 Serie Manual De Instrucciones

Delta MicroTech 9000 PureTouch AquaSuite 77100 Serie Manual De Instrucciones

Publicidad

Enlaces rápidos

MicroTech
®
9000 Filter Replacement Instructions
For PureTouch® AquaSuite™ Water Filtration
System, (77100 Series)*
Instrucciones para Reemplazar el Filtro 9000
Para el sistema de Filtrado de Agua PureTouch
AquaSuite™ (Serie 77100)*
Directives de remplacement du filtre MicroTech
Pour système de filtration de l'eau AquaSuite
PureTouch
®
(série 77100)*
HELPLINE: 1-877-DRINK-H2O
(1-877-374-6542)
Au Canada 1 800 465-6130
Filter Installation / Replacement
AquaSuite
Faucet
Filter Life
1
Indicator Light
2
1. The filter needs to be
replaced when the Filter Life
Indicator Light begins to flash
red. A flashing amber light
indicates less than 8% filter
life remaining.
2. Turn off water pressure by
closing the Stop Valve (1)
(open position shown) next
to the Filter Life Indicator
Module (2).
CAUTION: The Stop Valve
must be closed before
removal of filter.
3. Next, turn the AquaSuite
faucet handle to the full 'ON'
position for several seconds
to relieve any remaining
water pressure, then turn
back 'OFF' .
INS415A 09/05
4. Rotate the filter (4) by moving the arrow from
the locked position until it comes to a
complete stop in the unlocked position.
5. Pull the filter down and out of the Filter
Mounting Bracket. It is normal for a small
amount of water to drip from the mounting
bracket when the filter is removed.
6. Remove new filter from packaging and install
by reversing steps 4 and 5 above.
7. Turn on water pressure by opening the Stop
Valve.
8. Turn the AquaSuite faucet lever to the full 'ON'
position for several seconds to confirm proper
operation of the filter and turn back 'OFF' .
CAUTION: Air pressurization of the filter
occurs once the stop valve (1) is opened
following a new filter installation. Make
sure to relieve the pressure in the system
by opening up the AquaSuite faucet
valve after you open the stop valve on
the Filter Life Indicator Module.
*
(Faucet model number may contain a suffix that denotes a product color)
®
®
9000
Rated Capacity; 750 gallons (2839 Liters)
MC
Capacidad nominal; 750 galones (2839 litros)
Capacité évaluée à 2 839 litres (750 gallons)
LÍNEA DE AYUDA:
1-877-DRINK-H2O
(1-877-374-6542)
En Canadá 1 800 465-6130
Locked Position
Unlocked Positi
4
10. A new filter must be flushed with cold water for
11. Filter replacement complete.
MicroTech Replacement Filters
SERVICE À LA CLIENTÈLE :
1 800 465-6130
9. Reset the Filter Life Indicator Module by
pushing the reset button (5) on the Filter Life
Indicator Module.
5 minutes after it is installed. This procedure
helps clean the filter of loose carbon particles.
The Filter Life Indicator Lights will alternate
green and amber until flushing is complete.
Once completed, the light will change to
flashing green.
Do not use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after the
system. Systems certified for cyst reduction
may be used on disinfected waters that may
contain filterable cysts.
Replacement filters can be purchased at retail
home centers, plumbing supply warehouses,
internet retailers and directly from Moen at
www.pure-touch.com.
INS415A - 9/05
5
Reset Button

Publicidad

loading

Resumen de contenidos para Delta MicroTech 9000 PureTouch AquaSuite 77100 Serie

  • Página 1 INS415A - 9/05 MicroTech ® 9000 Filter Replacement Instructions For PureTouch® AquaSuite™ Water Filtration System, (77100 Series)* Instrucciones para Reemplazar el Filtro 9000 Para el sistema de Filtrado de Agua PureTouch ® AquaSuite™ (Serie 77100)* Directives de remplacement du filtre MicroTech ®...
  • Página 2 Instalación y Reemplazo del Filtro Mezcladora AquaSuite Posición trabado Faucet AquaSuite Locked Position Posición destrabado Unlocked Position Botón de Luz indicadora de Filter Life Reset Button restablecer vida del filtro Indicator Light 9. Restablezca el módulo indicador de vida del filtro presionando el botón en el mismo (5).