INTRODUCTION
Congratulations for purchasing the Phonic KA920 Karaoke
Mixing Amplifier, another great innovation bound to provide you
with hours of enjoyment at a time. The power provided to users
by the KA920 surpasses that of the average Karaoke mixer,
pumping 460 Watts of power to each channel.
Featuring a total of 6 microphone inputs, as well as 4 line inputs,
the KA920 features a multi-functional remote control for easy
adjustment of various properties. Karaoke audio and video are
input via the four included sets of RCA inputs, and output via the
two sets of RCA outputs.
This user's manual should be read thoroughly and stored in an
easy to find place for future reference. If you do, however, lose
the manual, you can easily download another one by logging
onto www.phonic.com.
FEATURES
2 x 460W / 4 ohms; 2 x 300W / 8 ohms Max Power Output
Multi-functional infrared remote control
Switching-mode power supplier for Clear, Powerful
Amplification
32/40-Bit DSP Reverb and Professional Digital Echo for
Superior Vocal Enhancement
9 Step Digital Key Controller Changes the Key of the Music
in half-key increments, without changing the tempo
On Board Video Switching with 4 Sets of A/V Inputs, 2 Audio
Outputs and 2 Video Output
6 Microphone Inputs
One AUX output and one Stereo AUX input
Individual Bass, Mid & Treble controls for microphone inputs
1 through 4
Music Bass, Mid & Treble Controls
Music Balance Control
Master Microphone and Music Volume Controls
BASIC SETUP
The KA920 Karaoke Mixing Amplifier can be rack mounted,
and will take up 3 standard rack units to do so. Your first step,
provided you wish to mount the KA920 into a rack, should be to
do so. Four screws, firmly in place on each corner of the unit, will
do the trick.
4
After this, you may wish to connect your various input and output
devices. The four different RCA input channels provide you
with enough to room for a DVD player with karaoke function (or
simply a DVD player, for use between karaoke sets), an actual
karaoke machine, a PC computer (for users who opted to have
the VGA inputs and outputs), or even a standard CD player
(which will not feature video output, but can be used regardless).
The Microphone inputs on the front of the KA920 are provided
for the addition of, you guessed it, microphones. If condenser
microphones are added to the KA920, be sure to activate the
Phantom power.
Plugging the RCA audio and video outputs of the KA920 allows the
audio and video to be sent to a television set or video projection
device. Passive speakers can be connected to the main audio
outputs and positioned for the best listening experience.
Use the provided AC power cord to connect the KA920 to an
appropriate power source. Be sure to check the voltage selector
is adjusted correctly before turning the unit on.
REMOTE CONTROL
KA920