Memory Function - Comfee EM720CPL-PM Instructivo

OPERATION

14. MEMORY FUNCTION

(1)
Press "0/Memory" to program and choose up to three cooking procedures.Each
procedure will be indicated by 1, 2 or 3 in the display.
(2)
Press "0/Memory" until your desired procedure number appears in the display.
Press
"START/+30SEC."
set for each procedure.
(3)
To program a procedure, follow the steps listed below. Example: Cook food at
80% Power Level for 3 minutes and 20 seconds; save as memory 2.
a.
Press "0/ Memory twice; screen displays 2.
b.
Press "Time Cook" , then press "3" , "2" and "0" in order.
c.
Press "Power" once, then press "8" for "PL 8" to display.
d.
Press
"START/+30SEC."
Or press
"START/+30SEC."
e.
To choose the procedure from the memory list, press Memory twice.
Screen will display "2". Press
NOTE:
Auto Menu cannot be set in Memory function.
15. TURN ON/OFF THE BUZZER SOUND
It is default that the buzzer sounds is open.In waiting state, long pressing on number
8 for 3 seconds, it sounds a long beep,
When the sounds turn off, long pressing on 8 for 3 seconds, it sounds a long beep
and the sound turn off. All the buttons has no beep when they are pressed, including
the ending cooking sounds is turn off too.
Note: All m odels has m ute function and energy-saved function.
This function can work under lock function too.
to begin it. A maximum of two cooking stages can be
"
to save the procedure. Oven beeps once.
twice directly to save and start cooking.
"START/+30SEC."
turns off the sound.
EN-22
to run procedure.