Veranda FG-VGOSCT5PC Manual Del Usuario página 4

Remove all protective material carefully after assembly to avoid scratching.
Avoid cutting the surface of the furniture while removing the packaging
1. Carefully turn the sectional pieces (A,B and C) upside down on a soft surface.
Remove protective cap from underneath the section, where the legs will be attached.
Align & secure foot (E) with bolts (G) through lock washer (I) and flat washer (H) using
Allen Wrench (J). Do not fully tighten bolt until both bolts are in and alignment is
checked. See Figure 1.
A & C
G
I
H
B
E
H
I
G
Figure 1
4