Andersen 400 Serie Manual Del Usuario página 10

8. Attach Interior Casing
• If optional Sill Stop, Stool or Sill Extension Jambs are to be
used refer to their specific instruction guides available at
your Andersen Dealer. Install on unit before Interior Casing.
When applying Interior Casing, carefully read and
follow directions and illustrations below. Failure to
do so may result in damage to Sill and Jamb Liners.
• Fasten Interior Casing to sill using 3d (1-1/4") finish nails.
Nail 1-5/8" below top of Sill Stop.
• Fasten Interior Casing to side jambs and head using
3d (1-1/4") finish nails. Nail 1" in from outside of Head and
Side Stop.
• Set all nails to approximately 1/16" deep below wood
surface. Apply wood filler to nail hole.
Finishing, Cleaning, and Maintenance Instructions
• DO NOT expose unfinished wood to high
moisture conditions, excessive heat or humidity.
Finish interior wood surfaces immediately after
installation. Unfinished wood surfaces will
discolor, deteriorate, and/or may bow and split.
• DO NOT stain or paint weatherstrip, silicone
beads, vinyl, glass, or hardware.
• Acid solutions used to wash masonry will
damage glass, fasteners, hardware, and metal
flashing. Follow the acid solution manufacturer's
instructions carefully. Protect and/or cover
Andersen products during the cleaning process
to prevent acid contact. If acid does come in
contact with unit, immediately wash all surfaces
with clean water.
(supplied by others)
Side Jamb
Sill
INTERIOR FINISHING
Read and follow finishing manufacturer's instructions
and warnings on each container of finish material for
priming, painting, staining, and varnishing.
Clean exterior frame, sash members, and insect
screens using a mild detergent-and-water solution and
a soft cloth or brush. DO NOT use abrasive cleaners or
solutions containing corrosive solvents. For persistent
dirt or grime, use a nonabrasive cleanser or a mixture
of water and alcohol or ammonia.
MAINTENANCE
Immediately sand and refinish any interior wood that
becomes stained or mildewed to prevent further
discoloration and/or damage. For further information,
contact your local Andersen dealer. Dealers can be
found in the Yellow Pages under Windows.
10
Installation Guide
1"
Nail
Casing
Side Jamb Cross Section
Nail at
15° Angle
Casing
CLEANING
1-5/8"