start.
5.1. Launch the "BVCAM" APP.
5.2. Set up motion detection photograph as below:
Step1: Tap the setting icon on the "Live video" page then choose "Advance Config" or
"Device Settings".
Step 2: Go to "Alarm Config" page, there, you can set a desired alarm sensitivity level, alarm
schedule, and alarm interval time. Enabling the "Warning Tone", "Push Notification" and
"On-screen Display" is also available.
Step 3: Tap "OK" to complete the motion detection photograph setting.
Step 4: When motion is detected, the camera will push a warning message to your phone and
will take a screenshot of the live video page automatically. You can go back to the "Live video"
page and tap "Alarm" at the bottom of the screen to check out the photos.