CASUALPLAY kudu Instrucciones Para El Uso página 23

Hood
(illustration 18)
• The hood is fastened to the seat, only the upholstery may be taken off to be washed.
Follow the washing instructions printed on the care label of the hood.
• Undo the zip on the front part of the hood and unfasten the Velcro on the sides (fig. 18).
• Unfasten the two clips and the Velcro on the back of the pushchair backrest.
• To fit the upholstery back on follow the same steps in reverse.
Folding
(illustration 19-20)
NOTE: The Kudu can be folded with or without the seat.
WARNING: The Kudu can not be folded with the complements (Prima easy, Prima
fix, Playmoon, Mako, Metropol. Baby zero plus, Newmoon or Sono).
Folding
with the seat facing forwards (illustration 19)
• Fold the hood.
• Move the backrest forwards.
• Place the seat backrest in the folding position.
• Slide the two catches on the sides of the handlebar.
• Push the handlebar forwards.
• Lastly, fold the rear part of the pushchair.
Folding
in the reverse position with the seat facing backwards
(illustration 20)
• Fold the hood and put the backrest in the horizontal position.
• Slide the two catches on the sides of the handlebar.
• Push the handlebar forwards.
• Fold the rear part of the pushchair.
• Fasten the locking device.
Fitting the rain cover
NOTICE: THIS RAIN COVER SHALL NOT BE USED ON A PUSHCHAIR NOT FITTED
WITH A CANOPY TO INSTALL IT.
• Unfold the hood.
• Place the rain cover on top of the Kudu, take care when fitting the rain cover to make
sure that the openings are at the back of the pushchair.
• Pass the handlebar through the openings and fasten the Velcro strips.
• Lastly, fasten the two Velcro strips to the basket.
(illustration 21)
21