Tabla de contenido
Publicidad
Tetra
Contour
®
Prepare Electrical Wiring
Electrical Requirements
• Light engines without light guide limited to indoor dry locations.
• Light engines with light guide acceptable to use in dry, damp or wet locations when installed correctly.
• The grounding and bonding of the LED Driver shall be done in accordance with National Electric Code
(NEC) Article 600.
• Follow all National Electric Codes (NEC) and local codes.
• These products are only suitable for connection to a circuit from a Class 2 power source. These products have
not been evaluated for use when connected to a power source that does not comply with Class 2 voltage and
energy limited supplies.
Components and Tools Required
1
2
10
11
14
1
UL approved 18 AWG (0.82mm
2
Tetra
End Caps
®
3
Tetra
Contour Light Guide connector
®
4
Tetra
Contour Light Guide 90° inside corner
®
5
Tetra
Contour Light Guide 90° outside corner
®
Tetra
Contour Light Guide 90° planar corner
6
®
Tetra
mounting clips
7
®
Weather box GEXNWB2
8
22 AWG (0.33mm
) tie-wire
9
2
#6, #8 or #10 (M2, M3 or M4) self drilling pan
10
headed screws
#6 (M2) screws
11
UL approved 22-14 AWG (0.33-2.08mm
12
wire connectors
Tetra
24 Volt power supply
13
®
Tetra
Contour Light Engine
14
®
15
Tetra
Contour Light Guide
®
16
Cordless drill
3
4
12
13
8 feet (2.44m)
) supply wire
2
) twist-on
2
5
6
17
16
15
17
Tape measure
18
Screwdriver
19
Wire stripper/cutter
20
Electrical grade silicone
Examples of electrical grade silicone:
• Momentive RTV 6700 Series Silicone Rubber Adhesive Sealant
• Momentive White Blanc RTV 162 Silicone Rubber Adhesive
Sealant-Electrical Grade
• Dow Corning 3140 - Non-Corrosive Flowable (clear)
• Dow Corning 3145 - Non-Corrosive Nonflowable (clear or gray)
• Dow Corning RTV 748 Non-Corrosive Sealant-White
21
Cutting Resolution Table
Light Engine Color
Red
Red-orange
Amber
Green
Blue
White
Warm White
2
Installation Guide
7
8
9
18
19
8 fe et (2 .4 4m )
Cutting Resolution
2.29 in. (58 mm)
2.29 in. (58 mm)
2.29 in. (58 mm)
2.29 in. (58 mm)
2.29 in. (58 mm)
2.00 in. (51 mm)
2.00 in. (51 mm)
20
Publicidad
Tabla de contenido
