Publicidad
133Wa Kingston Barstool — Parts List (cont.)
R — Brass Ring — Qty. 1
S — #10 x 1½" Brass
Screw — Qty. 4
T — #12 x 1" Pan Head
Screw— Qty. 8
ASSEMBLY INSTRUCTIONS
Phillips Head Screwdriver, Slotted Screwdriver, Rubber Mallet or Padded Hammer,
FIG. 1
1)
Spread a thin layer of glue in the four holes in the top edge of the Bottom Back (A). Insert the Back
Slats (B) into the holes. Slip the Top Back (CC) down over the top of the back slats. See FIGURE 1.
DO NOT GLUE THE BACK SLATS INTO THE TOP BACK (CC).
U — Wooden Button
V — Dowel — Qty. 2
W — #8 x 1¼" Pan Head
Screw — Qty. 2
TOOLS REQUIRED:
Wood Glue, Drill and 1/8" Drill Bit.
CC
— Qty. 2
B
A
XX — Allen Wrench — Qty. 1
YY — 50mm x 1/4" Brass
Screw — Qty. 2
ZA — #8 x 1
/
" Black
5
8
Screw— Qty. 4
IMPORTANT:
READ GLUING HINTS
BEFORE ASSEMBLING!
Not intended for use by
children without adult
supervision.
133Wa (Rev. 3/07) — Page 3
Publicidad
