Mainte-
nance
E
N
After Each Use
NOTE: When you have finished steam cleaning, ensure that both the
power switch and steam switch are turned off and that the plug is
removed from the electrical outlet.
Empty any remaining water from the tank by unscrewing the cap and
turning the steam cleaner upside down over a sink or outdoors. If
needed store the steam cleaner by using the hanging strap at the top
of the handle.
Cleaning the Steam Generator
IMPORTANT! Only follow these instructions when the steam clean-
er is completely cooled down. Also ensure that the plug is removed
from the electrical outlet.
1. Pull down the nozzle lock and twist the
steam nozzle first, before pulling the nozzle
out of the steam chamber completely.
2. Insert the nozzle brush into the chamber
and rotate the brush while pulling in and out
of the chamber.
3. Insert the steam nozzle back into the chamber
and turn it clockwise to lock back into position.
NOTE: Oreck recommends cleaning the chamber at least after every
12 - 15 uses to ensure optimum performance.
Unblocking the Steam Outlet
If steam flow appears reduced, the steam nozzle may be blocked. Unplug
the unit from the electrical outlet and allow it to cool.
1. Insert the nozzle pin into the center of the steam nozzle to clear any
blockage that may have formed.
Cleaning the Cloths
Both the floor and utility cloths can be machine washed (140˚F max). For
heavy soiling, soak the cloths in warm water and detergent or a mild stain
remover. Allow the cloths to dry completely before storing.
G
L
I
S
H
9