kEEPING PROPERTIES
colour developer
Bleach-fix
After partial removal protect concentrates in totally sealed original bottles using
Protectan. keep working solutions in completely full and well sealed glass or
plastic bottles.
SERvICE
technischer service
tetenAl AG & co. kG
schützenwall 31-35 · d-22844 norderstedt
tel. ++49 (0)40 / 521 45-0 · fax ++49 (0)40 / 521 45-132 · www.tetenal.com
the usual safety measures regarding care in the handling of chemicals should
be observed when using these products. use a protective barrier cream before
commencing work. wash your hands thoroughly after work, and apply a skin-
care cream. Always use adequate means of protection (safety goggles, gloves,
overalls), and ensure sufficient ventilation in the workplace at all times. Avoid
contact with skin and eyes. do not ingest chemicals. keep these products out of
reach of children and store away from foodstuffs at all times. label all storage
containers in a clear, permanent and unambiguous manner.
First aid measures in the event of:
skin contact: wash with ample water and soap; consult a doctor if necessary.
eye contact: rinse for 15 minutes with water; consult an eye specialist. swallo-
wing: keep packaging and consult a doctor immediately.
further details can be obtained from the safety data sheets or from the indica-
tions on the packaging.
rinse out concentrate residues with some of the water used for the solution
and add to the solution in question. Always wash concentrates from the contai-
8
freshly made
solution
12 weeks
12 weeks
50% used
solution
8 weeks
8 weeks
sAfety notes
dIsPosAl
opened
concentrates
24 weeks
24 weeks