SFA Bone-ster Instrucciones De Armado

Assembly Instructions & Warranty Information
The Bone-ster™ Mechanics Creeper
PLEASE DO NOT DISCARD THIS PAPER!
YOU WILL NEED IT FOR FUTURE REFERENCE
AND/OR ANY WARRANTY ISSUES
Congratulations and thank you for purchasing a member of the best family of mechan-
ics creepers you can buy! For the first time you will be able to roll over obstacles that
stop other creepers in their tracks, and be comfortable while doing so! With proper
care this will be the last creeper you will ever buy. If you have any questions or com-
ments, please call us at 888-332-6419.
-1 Bone-ster™body section
-4 Bone-ster™ caster
-1 bag containing sixteen each of 1/4" bolts and lock nuts
Place the creeper body decal side up on a table or the floor. Insert the sixteen 1/4"
bolts into the holes in the body, then place a piece of tape on each wheel pod to secure
the bolts to the body.
Flip the creeper over and slide the casters onto the bolts. Thread the nuts onto the
bolts and hand tighten. With a 7/16" wrench or socket, carefully tighten the nuts just
until the star washer is crushed. If the bolt spins while you turn the nut, you can use
a 3/16" allen wrench to hold the bolt in place.
NUTS WILL CRACK THE CREEPER BODY AND VOID YOUR WARRANTY!
Be sure to occasionally check the tightness of the nuts, as vibrations from rolling can
cause them to gradually loosen. Please see the reverse side of this sheet for caster
care instructions.
Limited Warranty Information:
Your Bone-ster creeper features a limited one year warranty on the body section and a
limited lifetime warranty on the wheels and casters.
Our warranty covers manufacturer defects only, and we (SFA Companies, Inc.) reserve
the right to determine the eligibility of all warranty claims.
Please note that the wheels on your creeper can be warranted seperately from your metal
casters, so if we do send you warranty replacements, please do not discard any part of
your creeper until your replacement parts have arrived.
You can find more details on our warranty policy on the reverse side of this sheet.
Included in this box are:
Assembly Instructions:
CAUTION: OVER TIGHTENING THE
HW4031-M0_032014