Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
B20
B21
F
G
•
F
Install the wiring cover plate. Make sure all
Tighten the wiring cover plate screw.
wiring connections are inside the box or under
the wiring cover plate.
B23
B22
H
Connect 4" duct and vent to the outside. Tape joints.
Connect wiring from the motor to the wiring cover plate.
If ducting does not fit securely, an adapter may need
to be purchased.
B24
B25
H
I
Reinstall the motor by inserting the tabs and pushing up into
Secure the motor by tightening the 2 screws.
position. Make sure the wires are not pinched
between the motor and the housing.
10
41722-01 09/09/2011
Publicidad
Tabla de contenido
