Publicidad
Step 13
1
D10
Groove
Insert the DRAWER SIDES (D10 and D11) at an angle into
å
the slot at each end of the RIGHT DRAWER FRONT (K)..
3
Fasten the DRAWER BACK (D72) to the DRAWER SIDES (D10 and D11). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
NOTE: Be sure the DRAWER BOTTOM (D969) inserts into the groove of the DRAWER BACK (D72).
å
Repeat this step for the left drawer using the LEFT DRAWER FRONT (L).
å
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D11
K
D10
D969
VIEW THE T-LOCK BOX VIDEO
2
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D969) into the grooves in the
å
DRAWER SIDES (D10 and D11) and RIGHT DRAWER FRONT (K).
D72
D11
418655
With the palm of
your hand, tap the
DRAWER BOTTOM
down into the groove.
U n
fi n
s u
i s h
r f a
e d
c e
D969
D10
K
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(8 used in this step)
D11
Page 17
Publicidad
