MANUAL DE USUARIO
2. Installation
Open the box carefully so as not to damage any parts, and make sure the contents are as follows:
QUICKSALT
control unit
Installation
Template
2.1. Tools
Below you will find the necessary tools for the electrical and hydraulic of your
equipment:
- Cleaner and glue for PVC pipes
- Cutting saw suitable for PVC
- Allen key set.
- Set of screwdrivers and tools needed for electrical connection to the control and protection
panel of the pump.
Unless you are sure that the PVC pipes do not contain water when you cut and/
or drill them. Use a battery-powered drill and not one that requires connection
to the mains.
36
Housing and
Electrolytic cell
Cell cable extender,
if you want to install the
control unit on the wall.
Racord and mounting
clamps
Pass-through kit
(sold separately)
QUICKSALT