Attaching Mounting Plate To Screen With Vesa 75 Or 100 Mounting Pattern - Paramount PT630 Instalación Y Ensamblaje

Attaching Mounting Plate to Screen with VESA 75 or 100 Mounting Pattern

Note: For VESA 200 x 100 mm and 200 x 200 mm hole patterns, see following page.
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
®
FOR VESA 75 MOUNTING PATTERN:
2
Choose hole pattern as shown below. Attach mounting
plate (B) to back of screen using four M4 x 10 mm
screws (F) as shown below.
*Note: If hole pattern is in a pocket, attach mounting
plate (B) to back of screen using four M4 x 20 mm
screws (G) and four retaining spacers (H) as indicated
below.
Skip to step 3
B
F
*For screens with a hole
pattern in a pocket,
spacers (H) go between
mounting plate (B) and
screen.
WARNING
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach mounting
plate (B) to back of screen using four M4 x 10 mm
screws (F) as shown below.
Skip to step 3
B
F
H
6 of 24 ISSUED: 11-19-07 SHEET #: 202-9245-1