Steelcase Flex Collection Desk Instrucciones De Uso página 17

_______________________________________________________________
Setting the default height
 Press the button se-
 Move up the toggle
 When the desired height
Setting the memory position
This function is used to save a specific desktop
height. Each position memory button (1, 2) can store
one desktop height. As a result, up to two memory
positions can be entered.
To save a desktop position, proceed as follows:
 Move the desktop to the
height you want.
 Press MEM1 for memory
position 1.
 Press MEM2 for memory
position 2.
When all 3 light bars light up,
the position is saved.
Calling up a memory position
This function is used to set a saved desktop position.
To set a saved desktop position, proceed as follows:
156631
quence MEM1, MEM2,
MEM1, MEM2
The display shows:
"SELECT", "HEIGHT".
switch up or down to ad-
just the standard height.
is reached, wait for two
seconds.
The new standard height
is stored as soon as the
blue light bar fills up.
Operating and adjusting
 Press the operating panel "up"
or "down".
Deleting the memory position
This function allows you to delete the stored desktop
positions.
To delete a stored desktop position, proceed as
follows:
 Press the MEM1 and
 "PRESET CLEAR" ap-
 The stored heights are
Setting the reminder function REM
This feature allows you to set a time when you want
to be reminded to change your position.
To set a saved desktop position, proceed as follows:
MEM2 buttons simulta-
neously.
pears on the display.
deleted.
17
EN