Encore electronics ENKVM-PS2 Guía De Usuario página 3

Installation B
NOTE:
1. Before you begin, make sure that the power to all the devices you will be connecting has
been turned off. You must unplug the power cords of any computers that have the
Keyboard Power On function. Otherwise, the switch will receive power from the computer.
2. To prevent damage to your equipment, make sure that all the devices you will be connecting
are properly grounded
Installing your new ENKVM-PS2 involves the following steps:
1. Plug your keyboard, monitor, and mouse into the Console ports on the ENKVM-PS2. Each
port is labeled with an appropriate icon.
2. Plug the attached KVM cables' keyboard, monitor, and mouse connectors into their
respective ports on the computers you are installing.
3. Turn on the power to the computers.
Note
: The ENKVM-PS2 by default links to the first computer you turn on.
Operation
Hotkey Port Selection
All Hotkey port switches begin with tapping the [Ctrl] key twice.
[Ctrl] [Ctrl]
Invokes Auto Scan Mode
Start Auto Scan. Press and release the [Left shift] key, and then press the [Right shift] key.
[Left shift] [Right shift]
Cancel Auto Scan Mode
Press [Space] key
2