Smart Lock; Product Maintenance - Fellowes AutoMax 550C Guia De Inicio Rapido

ADVANCED PRODUCT FEATURES
Auto Reverse
Stops and reverses paper
SMARTLOCK
shredding cycle.
ENGAGE SMARTLOCK
1 2
Open lid and add paper
Close lid and press
Lock icon
4 5
Press start ( ) to
begin shredding
turn off and shredder
will unlock
NOTE:
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com

PRODUCT MAINTENANCE

OILING SHREDDER
recommend you oil your shredder each time you empty your waste bin.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1 2
Open lid *Carefully apply oil
across cutters (do not
get oil in paper tray)
* Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
4
SmartLock™
keeps confidential documents secure
during shredding cycle.
TM
TM feature keeps confidential documents secure during
3
on pin pad. Drawer will lock
and Lock icon on control panel
will illuminate
3
Close lid. Press
start ( )
SilentShred™ Technology
Shreds without noisy disruptions.
TM feature
WHEN IN SLEEP MODE
lid and load paper
CLEANING AUTO-START INFRARED SENSORS
may become blocked by paper dust causing the motor to run even if there is no paper present.
(Note: the paper detection sensors are located in the center of the paper entry and bottom of paper tray).
TO CLEAN THE SENSORS
2
1
Turn off and unplug
Open lid
shredder
5
4
Dip cotton swab in
contamination from the paper sensors
rubbing alcohol
Energy Saving Sleep Mode
Feature shuts down the shredder
after 2 minutes of inactivity.
SLEEP MODE OPERATION
Feature shuts down the shredder after
2 minutes of inactivity
1 2
or Insert paper
3