Mode (Home/Store); Panel Protection; Channel; Channel Search - Sanyo DP50741 Manual Del Usario

ON-SCREEN MENU OPERATION
SETUP
(CONTINUED)

Mode (Home/Store)

Use the Mode (Home/Store) option if you would like to
change the initial Energy Saving Mode chosen at
HDTV's first power on.
Home Mode - Configured for saving energy and power
consumption reduction.
Store Mode - Configured for high brightness and con-
trast for display at retailer store.
NOTE: Only Home Mode qualifies for Energy Star.
Press ENTER on the desired mode.

Panel Protection

Displaying a still picture for a long time may cause an
"afterimage" or "ghost" on the screen. To help avoid
this situation, use the Picture Rotation function.
If an afterimage occurs, use the White Pattern feature
immediately to repair the panel. The more severe the
afterimage, the longer the curing process may take. The
default on-time for White Pattern is 30 minutes.
NOTE: The sooner you remove a still picture and
activate White Pattern, the more likely it is that
the panel can be repaired.
Exit the White Pattern blank screen by pressing
any button on the remote control (except
VOLUME, AUDIO or MUTE.)

CHANNEL

Display the On Screen menu and use the CURSOR LM
keys to select Channel. Press ENTER.

Channel Search

Auto – Search the detected mode, Cable or Air.
Cable – Search for analog and unscrambled (ClearQAM)
digital cable channels.
Air (Antenna) – Search for analog and digital off-air
channels.
Digital Add-On – Search for digital channels adding newly
found digital channels to the channel map database.
IMPORTANT FACT: This HDTV maintains only one database of
digital channels. Therefore, when you search for cable channels,
the database of antenna digital channels will be deleted. You will
only be able to receive those ClearQAM channels your cable
company provides.

Channel Scan Memory

Channel Scan Memory lists all Analog and Digital
channels found. It also lists Analog channels that were
not found, which can be added.
Use the CURSOR LM keys to move the channel select
bar through all enabled and disabled channels, or use
the CH LM keys to skip all disabled channels.
Press ENTER to enable or disable the selected channel.
NOTE: For information on local digital channels, visit
www.antennaweb.org
Need help? www.sanyoctv.com
11
1-800-877-5032