SPC DICKENS Manual De Usuario página 21

Do not enter excessively long file or sub file names or use unusual
characters as this could cause the device to malfunction. In this
case simply change the file or sub file name.
EN
CARD INSTALLATION
Insert the memory card into the card reader slot (16) in
such a way that the card's contact points are inwards and
facing up (follow the indication picture which can be found
on the card reader). Insert until it sits properly in the reader.
To remove the card push it inwards again in order for it to
be extracted. Remove the card from the card reader.
The card and USB memory (not included) should be FAT32
formatted.
POWER ON OR OFF THE E-READER
To power on the e-reader press and hold button (13) until
the screen powers on. After a few seconds the main menu
shall appear.
To power off the e-reader press and hold button (13) until
the screen powers off.
21