Transport And Storage - HYDROMETER HYDRUS Instrucciones De Instalación Y Funcionamiento

English
INSTALLATION GUIDE
This installation guide is intended for trained personnel and
therefore does not include basic working steps.
A comprehensive Installation and User Guide is available at
www.hydrometer.de
IMPORTANT! The seal on the meter (Fig. 4) must not be
damaged! A damaged seal will result in immediate invalidation
of the factory warranty and calibration/conformity.
NOTES
· The meter must be installed in compliance with the require-
ments of EN 14151 and the EC Type Examination Certificate!
· The standards for drinking water installations (e.g. DIN 1988)
must be observed!
· Medium: drinking water without additives
· The HYDRO-SET software is used for readout/parametrization
and is obtainable on the Internet at www.hydrometer.de

TRANSPORT AND STORAGE

· Water meters are precision devices and must be protected
against impact and vibration!
· Store meters in a frost-free place (also during transport).
· The meter can be damaged by frost.
Note on radio function: The radio function is switched off on
delivery and activated automatically when water is detected in