Product Specifications; General Safety Warnings - Promaker PRO-TP800 Manual Del Usuario

PRODUCT SPECIFICATIONS

Voltage /
Frequency
Power
Speed
Chuck size
Weight
Cord

GENERAL SAFETY WARNINGS

WARNING: Before using this
tool or any of its accessories, read
this manual and follow all Safety
Rules and Operating Instructions.
The important
safeguards
appearing in this manual are not
meant to cover
situations. It must be understood
that common sense and caution
are factors which cannot be built
into the product.
EYE. EAR & LUNG PROTECTION
ALWAYS
PROTECTION
CONFORMS
REQUIREMENTS or ANSI
SAFETY STANDARD Z87.1
FLYING DEBRIS
permanent eye damage. Prescription
eyeglasses ARE NOT a replacement
for proper eye protection.
WARNING:
eyewear can cause serious injury if
broken during the operation of a
power tool.
120V / 60Hz
800W
0-2800rmp
1/2"(13mm)
4.84Lbs
2m
precautions,
and instructions
all possible
WEAR
THAT
WITH
can cause
Non-compliant
WARNING:
protection,
extended periods of operation of
the tool, or if the operation is noisy.
SAVE THESE INSTRUCTIONS FOR
REFERENCE
WEAR A DUST MASK THAT IS
DESIGNED
WHEN OPERATING A POWER
TOOL
ENVIRONMENT.
WARNING: Dust that is created by
power sanding, sawing, grinding,
drilling,
activities may contain chemicals that
are known to cause cancer, birth
defects, or other genetic abnormalities.
These chemicals include:
• Lead from lead-based paints
• Crystalline silica from bricks,
cement,
products
• Arsenic
chemically treated lumber
EYE
The level of risk from exposure to these
chemicals varies, according to how
CSA
often this type of work is performed.
In order to reduce exposure to these
chemicals, work in a well-ventilated
area, and use approved safety
equipment, such as a dust mask that
is specifically designed to filter out
microscopic particles.
ELECTRICAL SAFETY
WARNING: To avoid electrical
hazards, fire hazards or damage to
the tool, use proper circuit protection.
Use
particularly
TO BE
IN A
and other construction
and other
and chromium
hearing
during
USED
DUSTY
masonry
from
2