Fitting The Guide Bar And Chain - Famastil F-POWER Manual De Instrucciones

to the oil becoming degraded, which can drastically shorten the lifetime of the saw
chain. Never use waste oil, thick oil or very thin sewing machine oil. These may dam-
age your chainsaw.
FITTING THE GUIDE BAR AND CHAIN (PIC 6)
WARNING! Always wear protective gloves when working on your chainsaw.
9
10
5. Chain tension adjustment screw
6. Chain
7. Guide bar
9. Chain cover knob
10. Chain cover assembly
01
Place the chainsaw onto a stable
surface. Loosen and remove the chain
cover knob (9).
02
Remove the chain cover assembly (10).
03
Place the chain over the guide bar
making sure that the saw chain cutters
on the upper part of the guide bar face
towards the front (PIC 2).
04
Guide the chain around the guide bar
and pull it to create a loop to one side at
the rear end of the guide bar.
14
12 7
6
12. Tensioning hole
13. Sliding nut peg
14. Drive sprocket
15. Studs
16. Spiked bumper
15
16
13
5
PIC 1
PIC 2
41