Operating Instructions - Kobalt KCS 6524B-03 Manual Del Usuario

OPERATING INSTRUCTIONS

1. Battery Pack
To Attach Battery Pack
a. Ensure that the trigger switch (D) is in the
"OFF" position.
b. Align the raised portion on the battery pack
with the grooves on the bottom of the tool, then
slide the battery pack onto the saw as shown.
c. Make sure that the latches on the battery pack
snap into place and the battery pack is secured
to the tool before beginning operation.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on battery pack
aligns with the groove on the tool and the latches
snap into place properly. Improper assembly of
the battery pack can cause damage to internal
components.
To Detach Battery Pack
a. Ensure that the trigger switch (D) is in the
"OFF" position.
b. Press the battery-release buttons to release the
battery pack.
c. Pull forward on the battery pack to remove it
from the tool.
1a
1b
10