Assembling The Flower Steps; Assembling The Frames - Gardenline 94228 Manual Del Usuario

Assembling the flower steps

WARNING!
Risk of injury!
Improper handling of the flower steps' components may result
in personal injury.
− Always wear the appropriate protective equipment during
assembly (e.g., steel-toed gardening boots, gardening or
work gloves, protective eyewear, etc.).
− Keep children and pets away from the work area and
away from the flower steps' components. The flower steps
contain small parts that may cause a choking hazard.
− Do not let children play with the flower steps' components.
These components are not toys for children.
− Find a flat, level area near the location where you want to place the flower
steps. Ensure the flower steps' components are handy.
Before tightening any screw, assemble all the parts first so that
you can adjust their positions as necessary.

Assembling the frames

1. Lay out one hook frame
one M6 × 30 mm screw
2. Loosely secure the cross brace to the back of the hook frame and the long L
frame to the front of the hook frame by manually inserting and securing the
M6 × 30 mm screw (see Fig. B).
Repeat for the remaining hook frame and long L frame.
3. Take one short L frame
4. Make sure the holes in the short L frame face upwards.
5. Loosely secure the short L frame to the hook frame by manually inserting
and securing an M6 × 25 mm screw
Repeat for the remaining short L frame.
Next, assemble the shelves (see chapter "Assembling the shelves").
1
, the cross brace
9
.
2 and match it up to the front of a hook frame.
8 (see Fig. C).
Assembling the flower steps
6
, one long L frame
4
, and
11