Electrical And Physical Specifications; General Precautions - Digital Projection INSIGHT 4K Dual LED Serie Guía De Información Importante

Important Information

Electrical and physical specifications

Mains Voltage
Operating Temperature
Storage Temperature
Operating Humidity
Weight
Power Consumption
Thermal Dissipation

General precautions

Do not open the cabinet. There are no user serviceable parts inside.
Use only the power cable provided.
Ensure that the power outlet includes a Ground connection, as this equipment MUST be
earthed.
Take care to prevent small objects such as paper or wire from falling into the projector.
If this does happen, switch off immediately, and have the objects removed by
authorised service personnel.
Do not expose the projector to rain or moisture, and do not place any liquids on top of
the projector.
Unplug before cleaning, and use a damp, not wet, cloth.
Do not touch the power plug with wet hands.
Do not touch the power plug during a thunder storm.
Handle the power cable carefully and avoid sharp bends. Do not use a damaged power
cable.
LED illumination lamps produce high intensity light. Do not look directly at the light
coming from the lamp housing, or the lens, or allow items such as magnifying lenses to
be placed in the light path. This could result in serious eye damage.
Do not touch the ventilation outlets, as they will become hot in use.
Do not cover or obstruct the ventilation outlets or inlets.
Do not cover the lens whilst the projector is switched on. This could cause a fire.
Always allow the projector to cool for 5 minutes before disconnecting the power or
moving the projector.
Never use strong detergents or solvents such as alcohol or thinners to clean the
projector and lens.
Page 4
100-240 VAC, 50-60 Hz (single phase)
0°C to 40°C
-10°C to 50°C
20% to 80% non-condensing
approximately 67 kg (148 lbs) without lens and handling frame
900 W
3070 BTU/hr
Digital Projection
INSIGHT 4K Dual LED Series
Rev A October 2016