Assembly Instructions; Unfold The Baby Stroller; Front Bar Installation; Sleeping Basket Installation - Belluno baby CAGLIARI Manual De Instrucciones Para Armado Y Uso

ASSEMBLY INSTRUCTIONS

01

UNFOLD THE BABY STROLLER

• Take the baby stroller out of the package as shown in Fig. 1.
• Unfold the folding hook, pull the handlebar and gradually push to open
the stroller until a "click" sound is heard (Fig. 1).
• The stroller is now correctly unfolded (Fig. 2).
1
02
INSTALL FRONT WHEELS
• As shown in Fig. 3, attach each wheel to the front wheel axle till a "click"
sound is heard.
• Press the steel side tab with one hand and remove the wheel with the
other (Fig. 4).
3
12
2
4
03
INSTALL REAR WHEELS
• As shown in Fig. 5, insert the rear wheels into the rear wheel axle till
a "click" sound is heard.
• Ensure the rear wheels are locked and cannot be pulled out.
• Remove rear wheels: push up on the rectangular lock. You will find
one for each wheel, and they are located on both sides of the axle.
Help yourself with the other hand to remove the wheel from the side
(Fig. 6).
5
04

FRONT BAR INSTALLATION

• As shown in Fig. 7, insert the front bar
into the structure of the stroller and
press down till a "click" sound is heard.
05

SLEEPING BASKET INSTALLATION

• The sleeping basket comes
pre-assembled. Just insert it in the
structure, as seen in Fig. 8.
• Check that both buttons on the sleeping
basket adapter engage correctly.
6
7
8
13