Monster PerfectView 400S Guía Del Usuario Y Garantía página 14

Installing the FlatScreen Mount
Masonry Mounting
While masonry materials (bolts and concrete anchors) are
included, masonry mounting requires specialized knowledge,
skills and tools. Monster highly recommends that you seek the
help of a professional installer when mounting to masonry.
DO NOT drill holes in masonry mortar joints.
1)
With the help of a friend, position the mounting plate
in your desired mounting location.
�����
2)
�����
wall plate is plumb or vertically straight. Position the
level horizontally with the narrow end fl ush against the
side of the wall plate. Hold the plate fi rmly in place.
3)
Mark the centers of the top and bottom mounting
holes on the wall plate with a pencil. Be careful not to
mark a mortar joint. With your electrical drill and 1/2"
masonry bit, pre-drill a 3" deep hole at each mark.
4) Install the supplied plastic concrete anchors
in each hole. Tap into hole until fully seated.
5) Attach the wall plate to the wall using the supplied
lag bolts and round washers, as shown to the right.
DO NOT over tighten bolts. This can damage
the wall plate or the surface of your wall.
10
Using the provided level, confi rm that the
continued