Appliance Description - Hans Dinslage SANITAS Instrucciones Para El Uso

dealer or the service address in such cases.
• Switch the device off immediately if it is defective or nor working properly.
• Repairs to electrical appliances must only be carried out by qualified persons. Incorrect
repairs can lead to considerable danger for the user. In the event of repairs, please contact
our customer service or an authorized dealer.
CAUTION
• Switch the device off and disconnect the power supply unit after every use and before
every cleaning.
• Make sure that the appliance and the attachments are not too close to heat sources such
as ovens, radiators or direct sunlight. The massage attachments and especially the soft
balls must not be put in the microwave.
• Only connect the device to the mains voltage stated on the rating plate.
• Do not cool the two soft balls below 0° C, to avoid freezing and other cold damage.
• Do not use any other attachments apart from the massage attachments supplied.
• Never cover the device while switched on (blanket, pillow,...)
• Switch off the device and disconnect it from the mains when you are removing or attaching
the handle or any massage attachments.

4. Appliance description

1. Infrared heating area
2. Rotary switch
– 0: OFF
– M: Only massage
– H+M: Massage with infrared
heating
3. Handle
4. Power cable
5. Two soft balls
6. Baseball
7. Tennis ball
8. Golf ball
9. Soccer ball
5. Operation
The appliance is used solely for massaging the human body.
WARNING
Never open one of the soft balls as it is difficult to close again. If gel stills escapes, never eat
or drink it. Avoid contact with the gel and keep children away from it. Seek medical attention
immediately if the gel has been swallowed.
1. Switch OFF (0) when changing the massage attachments on the device. For a cold massage screw on
one of the hemispherical massage attachments supplied:
– tennis ball, golf ball, baseball, soccer ball
– Soft ball filled with gel: Place the soft ball 2-3 hours in the fridge prior to use.
2. Plug the power cable into a mains outlet.
3. Switch the device on with the rotary switch.
– M: Only massage (with one of the massage attachments)
– H+M: Massage with infrared heating area
– 0: OFF
8