Cleaning; Warranty Conditions - Sagola 3300 GTO Manual De Instrucciones

4.- Loosen regulation
screw at the pressure
regulation valve. Adjust
required product cup
pressure by turning the
regulation valve to the
right.
Before opening the product tank,
disconnect the air pipe from the
inlet fitting on the tank lid.
When work has been completed, both the
gland and the product cup must be
cleaned with the appropriate thinner, in
order to remove any remaining product.
Empty the product cup and pour in the
thinner, fit and close the cup cover.
Operate the mechanisms and spray the
This device has been manufactured with
great precision and has been subjected to a
large number of controls before leaving the
factory.
- The WARRANTY is valid for three years,
counted as of the date of purchase, which
will be indicated by the seller in the place
provided for this purpose, together with his
stamp. Once the unit has been received,
please complete the warranty and send this
to the manufacturer for validation.
- This WARRANTY covers any manufactu-
ring defect, which will be repaired without
charge. However, any malfunction resulting
from the incorrect use of the unit, such as
inadequate connections, breakage due to
dropping, or similar, the normal wear of
components and in general any deficiency
not attributable to the manufacturer of the
device, are expressly excluded. Likewise,
the WARRANTY shall be rendered null and

8. CLEANING

9. WARRANTY CONDITIONS

- 13 -
The pressure depends on the material
viscosity and the requested material flow in
conjunction with the nozzle size, but usually
around 0.05 bar, which is more than enough
for more viscous products. In no case should
it exceed 0.2 bar for the safety of the
equipment.
thinner until the application is clean. Repeat
the operation as many times as may be
necessary. Remove any remains of product
from the gun and cup with a cloth soaked in
thinner.
The gun and the tank can also be cleaned in
a SAGOLA gun washer.
Never immerse the SAGOLA pressure
regulator and the air hose coupling in the
diluent.
void when it is evident that the unit has been
handled by persons other than our Technical
Assistance Service.
In the case of any breakdown during the
guarantee period, please attach the comple-
ted warranty certificate to the unit and deliver
this to the nearest Technical Assistance
Service or get in touch with the factory.
Any demand of greater importance against
the supplier, in particular compensation for
damages, is excluded. This is also applicable
to any damages that might arise during
counselling, while acquiring practice and
during demonstration.
Any device for which there is no duly comple-
ted guarantee certificate in the files of
SAGOLA S.A. will be rejected.
The manufacturer reserves the right to make
technical modifications.