Disc Cleaning Procedure - Aleratec DVD/CD Disc Repair Plus Guía De Uso

Disc Cleaning Procedure

The Disc Cleaning procedure removes surface contaminants such as dust,
dirt, finger prints, smudges, smears and stains.
4
1. Open the kit and remove the cleaning head marked "WET".
2. Remove the cleaning head cover and then use the plastic
end of the brush to remove the cleaning head and the
spring.
3. Remove the cleaning solution from the kit. Then, fill the
cleaning unit with solution until 80% full.
Note: Upon initial use, a sharp object such as a safety
pin must be used to puncture the mouth of the bottle.
4. Then replace the spring and the cleaning head.
5. Open the top cover and place the cleaning heads marked
"WET" and "DRY" in their respective places, as indicated
on the machine. Once in, rotate each of them in a
counterclockwise direction until secure.
www.aleratec.com