Connection Diagram; Remote Control - ADS Technologies TV Elite XGA Guia Del Usuario

5. Connect the Red and White RCA jacks to the Left and Right audio
input jacks on your TV.
6. Turn on your TV and select the external input source (Video 1 or
Input 1) on your TV to select the external device as your video source.

Remote Control

The Remote Control unit that is included with TV Elite XGA is ready to
use, battery included. Remove Protective Battery Cover: The unit
ships with the battery pre-installed, but has a plastic cover on the bat-
tery so it will not be discharged during shipping.
1. Remove Battery compartment cover from bottom of Remote control
2. Pull Plastic strip – put slight pressure on battery so it won't pop out
3. Press battery snugly into place
4. Replace battery compartment cover
OR

Connection Diagram

7