Clover Flex Guía De Inicio Rápida página 12

SIM Installation
Power off the device by holding the power button until you see the
power off button on the screen, then tap it.
Open the receipt paper door and
locate the screws above the serial
number (S/N).
Use your fingernail or screwdriver
to pull down black flap.
Slide the SIM card into the tray
and align it with the angled corner.
9 Clover Flex Starter Kit Quick Start Guide
7-8
Use the screwdriver to turn the
screws counter-clockwise 7–8
times; the screws won't fall out.
Locate the left tray and remove the
current SIM card.
Finally, close the flap, tighten the
screws, and power on the device.