Mestra R-100141 Manual De Instrucciones página 8

OPERATION GUIDELINES
Important! Long cycle time will cause heat to build up inside the unit and water temperature to rise. Do not use the
unit for more than 20 minutes continuously. Take a 10-minute break in between to prolong the life of the unit.
8
Open the cover, place the object to be cleaned inside the basket then in the stainless steel
tank.
Fill the tank with tap water.
The liquid must cover the object that is to be cleaned, but must not exceed "MAX" line.
Close the cover and plug in the power cord.
- "180" appears in the display window.
- This is the default time and is good for normal cleaning.
Select desired time setting by pressing Time button:
Press "On/Off" button to start the cleaning process. The red LED lights up and the timer
starts to count down to zero.
Note: you'll hear buzzing sound which is normal.
When the timer counts down to zero, the cleaning process stops automatically and the
display shows "000".
If you need to end the process ahead of time, press On/Off button. If you need to repeat
the cycle or to increase the time, press Time button to select desired time then press
On/Off button again to restart it.
When clean is done, open the cover, remove the items. Empty the tank by pouring out
the water in the direction shown with arrow on the unit. Avoid pouring it over the front
where the control panel is located. Wipe the tank clean and remove the power plug.
Note: To avoid residue building up, always empty the tank and wipe it clean. We
recommend using fresh water each time.
Store the unit in a cool and dry place.