External Voice Recording - Brigmton BT- 500 Manual De Instrucciones

error info, check the error list.
7. If the memory is full, it will not record.

EXTERNAL VOICE RECORDING

1. Turn off the alarm function before starting the external
voice recorder using the built-in Microphone, otherwise the
unit will stop recording once the alarm goes on.
2. Push the <MODE> switch downwards to "Voice" mode,
then turn on the unit by short pressing the <
button.
4. To start the recording, press & Hold the <REC> button until
" ● " displays, release the button and wait until the Record
Time start running.
5. While recording, press the <SW> button quickly to pause;
press the <MW/> button to stop and automatically save the
recording file as WAV format into memory. (While finishing
the recording, please try to memorize the recording time in
order to locate the file easily.)
NOTE:
1. You can find and play all the record files in voice mode.
2. If the recording time is over 99 hours, "E" will display
before recording.
3. The record file numbers are ordered sequentially. If you
have deleted some record files, the file number of next
recording will be the numbers of the deleted files in the
same order of sequence.
>