Using The Cd Player; About Compact Discs; Loading A Disc; Playing A Disc - Naxa NPB-426 Manual De Instrucciones

Using the CD Player

Press the FUNCTION key [19] until the CD indicator
lights on the LCD screen [11].

About Compact Discs

This player is compatible with all digital audio CDs,
digital audio CD-Recordable discs (CD-R) and CD-Re-
writable discs (CD-RW) that have been finalized, and
CD-DA format digital audio CDs.
L ѥ
Only handle a CD by its edge. Avoid touch-
ing the label or the playable side with your
hands or any other object.

Loading a Disc

1. Open the CD compartment [3]. Press down on CD
door latch [4] to release the spring latch.
2. Load a compatible disc. Place the CD into the com-
partment [3] with its label facing up.
3. Close the CD compartment [3]. Lower the door and
Page 14
push down on it at the CD door latch [4]. Make sure
that the spring latch catches and secures the door in
place.
4. The player will attempt to read the disc once the
door is closed.
• The LCD screen [11] will show the amount of
playable tracks on the disc.
• If the disc was loaded incorrectly, is incompat-
ible with the player, or is unreadable for some
other reason, the LCD screen [11] will read "NO."
L ѥ
To ensure good system performance, wait
until the player recognizes and reads the
disc before proceeding.

Playing a Disc

With a compatible disc in the CD compartment [3]:
• Press the PLAY/PAUSE key [18] to start playback.
• Play will start from track 1
• The Play/Pause indicator on the LCD screen [11]
will light up.
Naxa Electronics